Fluid Motion Research Articles

Bent-half space model problem for Lame equation with surface tension

The study of fluid flow is a very fascinating area of fluid dynamics. Fluid motion has received more and more attention in recent years and numerous researchers have looked into this topic. However, they rarely used a mathematical analysis approach to analyse fluid motion; instead, they used numerical analysis. This serves as a significant justification for the researcher's decision to study fluid flow from the perspective of mathematical analysis. In this paper, we consider the ${\mathcal R}$-boundedness of the solution operator families of the Lam\'e equation with surface tension in bent half-space model problem by taking into account the surface tension in a bounded domain of {\it N}-dimensional Euclidean space ($N \geq 2$). The motion of the model problem can be described by linearizing an equation system of a model problem. This research is a continuation of [13]. They investigated the ${\mathcal R}$-boundedness of the solution operator families in the half-space case for the model problem of the Lam\'e equation with surface tension. First of all, by using Laplace transformation we consider the resolvent of the model problem, then treat the problem in bent half-space case. By using Weis's operator-valued Fourier multiplier theorem, we know that ${\mathcal R}$-boundedness implies the maximal $L_p$-$L_q$ regularity for the initial boundary value. This regularity is an essential tool for the partial differential equation problem.

Identifying some regularities of the turbulent steady-state plane-parallel motion of incompressible fluid at the entrance length

Identifying some regularities of the turbulent steady-state plane-parallel motion of incompressible fluid at the entrance length

Shear and normal stresses of electroosmotic magnetized physiological nanofluid on curved artery with moderate Reynolds number: application on electroshock therapy

Purpose Studying the shear stress and pressure resulting on the walls of blood vessels, especially during high-pressure cases, which may lead to the explosion or rupture of these vessels, can also lead to the death of many patients. Therefore, it was necessary to try to control the shear and normal stresses on these veins through nanoparticles in the presence of some external forces, such as exposure to some electromagnetic shocks, to reduce the risk of high pressure and stress on those blood vessels. This study aims to examines the shear and normal stresses of electroosmotic-magnetized Sutterby Buongiorno’s nanofluid in a symmetric peristaltic channel with a moderate Reynolds number and curvature. The production of thermal radiation is also considered. Sutterby nanofluids equations of motion, energy equation, nanoparticles concentration, induced magnetic field and electric potential are calculated without approximation using small and long wavelengths with moderate Reynolds numbers. Design/methodology/approach The Adomian decomposition method solves the nonlinear partial differential equations with related boundary conditions. Graphs and tables show flow features and biophysical factors like shear and normal stresses. Findings This study found that when curvature and a moderate Reynolds number are present, the non-Newtonian Sutterby fluid raises shear stress across all domains due to velocity decay, resulting in high shear stress. Additionally, modest mobility increases shear stress across all channel domains. The Sutterby parameter causes fluid motion resistance, which results in low energy generation and a decrease in the temperature distribution. Originality/value Equations of motion, energy equation, nanoparticle concentration, induced magnetic field and electric potential for Sutterby nano-fluids are obtained without any approximation i.e. the authors take small and long wavelengths and also moderate Reynolds numbers.

Hybrid Nanofluids Flow over a Vertical Cylinder with Heat Source/Sink and Prescribed Surface Heat Flux

This work presents the steady mixed convection in Al2O3-Cu/water hybrid nanofluids along a vertically stretching/shrinking cylinder with the prescribed surface heat flux and the effects of heat source/sink. The governing hybrid nanofluids model was simplified using a similarity transformation. The bvp4c solver in MATLAB software is used to solve the hybrid nanofluids flow problem numerically. It is observed that two outcomes are feasible for the assisting and opposing flow regions  as well as stretching and shrinking cases . Besides that, the effects of the dimensionless parameters are analyzed graphically and tabularly. In particular, the critical point is reduced by 3% when the curvature parameter goes from 0 to 0.1 and from 0.1 to 0.2 when the cylinder is stretched. This means that the higher curvature parameter could delay the process of separating the boundary layer. It is noted that the positive heat source will decrease the fluid motions and reduce the shear stress on the surface. Moreover, Al2O3-Cu/water hybrid nanofluids have better performance in heat transfer and velocity of fluid flow than Al2O3/water nanofluids.

Mixed bioconvection of nanofluid of oxytactic bacteria through a porous cavity with inlet and outlet under periodic magnetic field using artificial intelligence based on LightGBM algorithm

The comprehension of microorganisms’ responses to magnetic field and fluid motion offers potential for the advancement of targeted drug delivery systems or medical interventions reliant on biological fluids. In this paper, the mixed bioconvection flow of nanofluid of oxytactic bacteria has been investigated through a porous cavity with inlet and outlet ports under the impact of periodic magnetic field. All the walls of the cavity are fixed at the constant high temperature. The proposed problem has been modeled first and then simulated using the finite element method. The computed computational fluid dynamics results have been analyzed for the several important controlling parameters. It is observed that there is at least 65% increment on heat transfer between the lowest and highest Peclet numbers. Further, regression analysis was conducted using the LightGBM algorithm. Careful parameter tuning was performed to avoid overfitting, ensuring that the model did not memorize the training data. According to the R2 values used for regression analysis, in the 18 datasets used for the performance metric comparison of the artificial intelligence model, a total of 18 targets were tried to be predicted for different Richardson number (0.1, 1, and 10) and Lewis Number (0.1, 1, and 10) values for each motile microorganisms, temperature and oxygen concentration values specified in the datasets, and a minimum accuracy of 95% and a maximum accuracy of 98% were obtained. These findings demonstrate the capability of the LightGBM algorithm to accurately predict the target variable within a high range of accuracy for the given datasets.

Effect of fluid motions on finite spheres released in turbulent boundary layers

This paper extends the work in Tee et al. (Intl J. Multiphase Flow, vol. 133, 2020, 103462) to investigate the effect of turbulent fluid motions on the translation and rotation of lifting and wall-interacting spheres in boundary layers. Each sphere was released from rest in smooth-wall boundary layers with $Re_\tau =670$ and 1300 ( $d^+=56$ and 116, respectively) and allowed to propagate with the incoming fluid. Sphere and surrounding fluid motions were tracked simultaneously via three-dimensional particle tracking velocimetry and stereoscopic particle image velocimetry in streamwise–spanwise planes. Two-point correlations of sphere and fluid streamwise velocities yielded long positive regions associated with long fast- and slow-moving zones that approach and move over the spheres. The related spanwise correlations were shorter due to the shorter coherence length of spanwise fluid structures. In general, spheres lag the surrounding fluid. The less-dense lifting sphere had smaller particle Reynolds numbers varying from near zero up to 300. Its lift-offs coincided with oncoming fast-moving zones and fluid upwash. Wall friction initially retarded the acceleration of the denser sphere. Later, fluid torque associated with approaching high-velocity regions initiated forward rotation. The rotation, which was long-lived, induced sufficient Magnus lift to initiate repeated small lift-offs, reduce wall friction, and accelerate the sphere to higher sustained velocity. Particle Reynolds numbers remained above 200, and vortex shedding was omnipresent such that the spheres clearly altered the fluid motion. Spanwise fluid shear occasionally initiated wall-normal sphere rotation and relatively long-lasting Magnus side lift. Hence the finite sphere size contributed to multiple dynamical effects not present in point-particle models.

Flow analysis of Williamson model over a moving surface with nonlinear convection/diffusion and variable thermal conductivity

This article analyses the flow across a moving surface using the magnetohydrodynamic (MHD) Williamson fluid model in detail, accounting for the effects of diffusion, nonlinear convection, and variable thermal conductivity. The heat transmission within the system is impacted by the changing thermal conductivity, which can also significantly alter the flow behavior. The effects of the moving surface on flow forms in porous media are explained here using the Darcy model. The similarity transformations are used to convert the underlying nonlinear partial differential equations into a collection of ordinary differential equations. The work uses a numerical RK4 technique to examine the complex incompressible fluid flow behavior on a moving surface. The study’s conclusions provide insight into the intricate flow patterns and shear layer forms brought on by the interaction of fluid and surface motion while taking varied thermal conductivity into account. The findings give important information for the design and optimization of engineering applications involving changeable thermal characteristics and advance our understanding of fluid dynamics in geophysical and atmospheric systems. Physical descriptions are used to depict how flow parameters behave in relation to velocity, temperature, and concentration distributions.

Effect of ultrasound geometry on the production efficiency of damaged starch: Determining rheology parameters, and non-isothermal reaction kinetics

Present study investigates the effects of probe size geometry on thermodynamic kinetics, rheology, and microstructure of wheat and tapioca starch. Ultrasound treatment using different probe diameters (20 mm and 100 mm) significantly influenced the gelatinization process. Results showed reduced enthalpy (ΔH) and Gibbs energy (ΔG), indicating enhanced gelatinization efficiency. According to the results, using a 20 mm and 100 mm probe leads to a reduction of 52.7 % and 68.6 % in reaction enthalpy for wheat starch compared to native starch, respectively. Microstructure analysis revealed structural changes, with ultrasound treatment leading to granular fractures and a sheet-like structure with air bubbles. The rheological behavior of the starches is found to exhibit shear thinning behavior, with the Casson model providing the best fit for the experimental data. Moreover, rheology modeling using Herschel-Bulkley and power law models showed increased viscosity and shear stress in larger probes. Numerical simulation data demonstrated that probe size influenced ultrasonic pressure, sound pressure level, and thermal power dissipation density, affecting fluid motion and velocity field components. Moreover, the maximum dissipated power decreases from 8.43 to 0.655 mW/m3 with an increase in probe diameter from 20 to 100 mm. The average yield shear stress values are calculated as 3.36 and 3.14 for wheat and tapioca starches, respectively. The larger probe diameter leads to greater entropy increases, with tapioca starch showing a 4.72 % increase and wheat starch a 4.97 % increase, compared to 2.56 % and 3.11 %, respectively, with the smaller probe. Additionally, the Keller-Miksis model provided insights into bubble dynamics, revealing increased pressure and temperature with higher pressure amplitudes.

A computational approach to modeling flow-induced large deformation of thin-walled compliant vessels

We present a computational method capable of modeling 3D flow-induced deformation of thin, highly compliant, hyperelastic vessels conveying viscous, inertial fluid. The method can uniformly consider vessel extension and collapse. Very large inflation, transient deformation, complex flow features as well as highly complex buckling shapes are well resolved by this method. The methodology combines finite volume and spectral methods for fluid motion, finite element method for structural mechanics of the vessel wall, and the immersed boundary method for two-way coupling between the wall and fluid. A hybrid of the continuous forcing and the ghost node methodologies capitalizing on the strengths of each is developed. The method avoids the surface instability encountered with the continuous forcing methods, as well as the need for domain remeshing as required in the iterative and partitioned approaches. The vessel wall can follow linear or nonlinear (strain softening and hardening) material models, and the fluid inertia can vary over a wide range. We demonstrate the versatility of the method by considering vessel inflation and collapse with large, complex, and transient deformation. Remarkable differences in vessel inflation at low versus moderate inertia are observed; this includes steady versus oscillatory motion, emergence of flow recirculation and pressure wave reflection which are well resolved. For the collapsing vessels, well-defined shapes with different buckling modes as well as highly complex buckling with fine surface folds are predicted. Additionally, a second-order correction to the well-known law of Laplace is developed and used to validate our computational results for vessel inflation.

Isometric Immersions and the Waving of Flags.

In this article we propose a novel geometric model to study the motion of a physical flag. In our approach, a flag is viewed as an isometric immersion from the square with values in satisfying certain boundary conditions at the flag pole. Under additional regularity constraints we show that the space of all such flags carries the structure of an infinite dimensional manifold and can be viewed as a submanifold of the space of all immersions. In the second part of the article we equip the space of isometric immersions with its natural kinetic energy and derive the corresponding equations of motion. This approach can be viewed in a spirit similar to Arnold's geometric picture for the motion of an incompressible fluid.

Study on dynamic characteristics of cavitation in underwater explosion with large charge

Underwater explosions (UNDEX) generate shock waves that interact with the air–water interface and structures, leading to the occurrence of rarefaction waves and inducing cavitation phenomena. In deep-water explosions, complex coupling relationships exist between shock wave propagation, bubble motion, and cavitation evolution. The shock wave initiates the formation of cavitation, and their growth and collapse are influenced by the pressure field. The collapsing bubbles generate additional shock waves and fluid motion, affecting subsequent shock wave propagation and bubble behavior. This intricate interaction significantly impacts the hydrodynamic characteristics of deep-water explosions, including pressure distribution, density, and phase changes in the surrounding fluid. In this paper, we utilize a two-fluid phase transition model to capture the evolution of cavitation in deep-water explosions. Our numerical results demonstrate that the introduction of a two-phase vapor–liquid phase change model is necessary to accurately capture scenarios involving prominent evaporation or condensation phenomena. Furthermore, we find that the cavitation produced by the same charge under different explosion depths exhibits significant differences, as does the peak value of cavitation collapse pressure. Similarly, the cavitation produced by different charge quantities under the same explosion depth varies, and the relationship between cavitation volume and charge quantity is not a simple linear increase. The research methods and results presented in this paper provide an important reference for studying the dynamic characteristics of deep-water explosions.

Formation of Singularity for Isentropic Irrotational Compressible Euler Equations

The domain of science and engineering relies heavily on an in-depth comprehension of fluid dynamics, given the prevalence of fluids such as water, air, and interstellar gas in the universe. Euler equations form the basis for the study of fluid motion. This paper is concerned with the Cauchy problem of isentropic compressible Euler equations away from the vacuum. We use the integration method with the general test function f=f(r), proving that there exist the corresponding blowup results of C1 irrotational solutions for Euler equations and Euler equations with time-dependent damping in Rn (n≥2), provided the density-independent initial functional is sufficiently large. We also provide two simple and explicit test functions f(r)=r and f(r)=1+r, to demonstrate the blowup phenomenon in the one-dimensional case. In particular, our results are applicable to the non-radial system.

Hall current effect on molecules motion in viscous non-Newtonian power law fluid with Joule heating and fluxing model of Cattaneo-Christov

This study examines the molecules motion influences and thermal attributes in power-law non-Newtonian dissipative fluids' magnetohydrodynamic behavior, Joule heating, electromigration, and Cattaneo-Christov effects. Effects of Hall on both flow velocity and temperature, as well as the heat transport are considered. The investigation looks at heat transference that occurs when there is a slippage consequence, how the temperature influences the viscosity of the fluid, and how the potential parameters influence the exponential non-Newtonian flow of fluid via an extensible sheet. Runge-Kutta-Fehlberg's approach, which is based on the shooting procedure, was used to develop computational solutions for nonlinear ordinary differential equations. When exposed to a deformation that is generated by expansion, pressure, or agitation, a dilatant fluid is characterized by a phenomenon in which its viscosity rises and may harden. This phenomenon is referred to as the dilatation phenomenon. High shearing rates provide the impression that it is stable. When expanded, subjected to pressure, or agitated, dilatant fluids become more viscous and transform into solids. Both the non-equilibrium that occurs within the fluid and the reduction of the irreversibility processes that occur within it are caused by the acquired charges that are a result of Hall effect of fluid molecules.

Drug Distribution After Intravitreal Injection: A Mathematical Model.

Intravitreal injection of drugs is commonly used for treatment of chorioretinal ocular pathologies, such as age-related macular degeneration. Injection causes a transient increase in the intraocular volume and, consequently, of the intraocular pressure (IOP). The aim of this work is to investigate how intravitreal flow patterns generated during the post-injection eye deflation influence the transport and distribution of the injected drug. We present mathematical and computational models of fluid motion and mass transport in the vitreous chamber during the transient phase after injection, including the previously unexplored effects of globe deflation as ocular volume decreases. During eye globe deflation, significant fluid velocities are generated within the vitreous chamber, which can possibly contribute to drug transport. Pressure variations within the eye globe are small compared to IOP. Even if significant fluid velocities are generated in the vitreous chamber after drug injection, these are found to have negligible overall effect on drug distribution.

Exploring the numerical simulation of Maxwell nanofluid flow over a stretching sheet with the influence of chemical reactions and thermal radiation

The significance of the study lies in illuminating the consequences of thermophoresis and Brownian motion on heat and mass transfer, offering valuable insights crucial for practical applications. The purpose of this study is to look into how Casson–Williamson and Maxwell nanofluids flow over a stretching sheet in order to understand how heat and mass move in that situation. The mathematical structure comprises a set of partial differential equations (PDEs) converted into ordinary differential equations (ODEs) through a similarity transformation. Subsequently, the well-established MATLAB BVP4C method, integral to the finite difference approach, is applied to solve these ODEs. For the assurance of the method’s reliability and precision, the acquired outcomes are cross-referenced with existing literature, which is a crucial step in validation. The numerical results are depicted visually and in tables, specifically highlighting the impulse of different influencing elements on the Nusselt number, friction factor, and Sherwood number. Notably, an enhancement within the Brownian motion parameter (Nb) and the thermophoresis parameter (Nt) is found to correspond to higher local Nusselt numbers, indicating an enhancement in heat transfer. Conversely, elevated quantities of the Brownian motion parameter (Nb) result in a reduction in local Sherwood numbers. Physically, a higher Brownian motion parameter causes significant nanofluid particle displacement, enhancing their kinetic energy and intensifying heat generation in the boundary layer. The magnetic parameter (M) influences speed profile decline caused by the Lorentz force, which hinders fluid motion.

A High Copper Concentration Copper-Quadrol Complex Electroless Solution for Chip Bonding Applications.

This article presents a novel bonding method for chip packaging applications in the semiconductor industry, with a focus on downsizing high-density and 3D-stacked interconnections to improve efficiency and performance. Microfluidic electroless interconnections have been identified as a potential solution for bonding pillar joints at low temperatures and pressures. However, the complex and time-consuming nature of their production process hinders their suitability for mass production. To overcome these challenges, we propose a tailored plating solution using an enhanced copper concentration and plating rate. By eliminating the need for fluid motion and reducing the process time, this method can be used for mass production. The Taguchi approach is first used to optimize the copper-quadrol complex solution with the plating rate and decomposition time. This solution exhibits a copper concentration that is over five times higher than that of conventional solutions, a plating rate of 22.2 μm/h, and a decomposition time of 8 min on a Cu layer substrate. This technique enables Cu pillars to be successfully bonded within 7 min at 35 °C. Planarizing the pillar surface yields a high bonding percentage of 99%. Mechanical shear testing shows a significant fracture strength of 76 MPa.

Effects of thermal boundary conditions on Stokes' second problem

In this investigation, an infinite flat plate is employed to examine the flow behavior of Casson fluid and the associated heat transfer phenomena. The plate undergoes an initial acceleration with a constant velocity until it eventually decelerates to rest. The energy equation incorporates the effects of viscous dissipation. An appropriate similarity transformation transforms the governing equations into coupled nonlinear ordinary differential equations (ODEs). A closed-form solution for the velocity profile is obtained, while the energy equation is solved using the built-in function NDSOLVE in Mathematica. The study investigates the influence of governing parameters on dimensionless velocity, temperature, skin friction, and local heat transfer rate under two thermal boundary conditions: Newtonian heating and convective boundary conditions. The fluid's thermophysical properties remain constant throughout the study, with the surface temperature of the plate assumed to be fixed at a constant value. A graphical analysis examines the flow behavior and temperature distribution, revealing the impact of non-dimensional parameters. This study reveals that thermal boundary conditions significantly influence heat transfer rates, with Newtonian heating leading to an increase and convective heating causing a decrease. This is attributed to the direct application of heat at the boundary in Newtonian heating, which enhances thermal energy transfer. In contrast, convective heating disperses heat through fluid motion, limiting transfer rates.

MHD free convection with Joule heating and entropy generation inside an H-shaped hollow structure

In this research, a free convective flow of water inside an H-shaped hollow structure which is subjected to the existence of an exterior magnetic field and Joule heating is computationally investigated. The structure's right and left upright surfaces are maintained at invariant ambient thermal condition, while the top and bottom-most surfaces of the structure are in adiabatic condition. The rest of the inner walls are heated isothermally. Computational analysis is carried out for different configurations of the chamber by solving Navier-Stokes and heat energy equations via the finite element approach. Parametric computations are conducted by varying Hartmann numbers (0 ≤ Ha ≤ 20), Rayleigh numbers (103 ≤ Ra ≤ 106), width of the vertical sections (0.2 ≤ d/L ≤ 0.4, where L denotes the structure's reference dimension), and thickness of the horizontal middle section (0.2 ≤ t/L ≤ 0.4). To find out the impact of the governing parameters on thermal performance for different configurations, the mean Nusselt number along the hot walls, mean temperature of fluid, overall entropy generation, and thermal performance criterion are assessed. In addition, the variations in fluid motion and thermal patterns are reported in terms of streamlines, isotherms, and heatlines. With a larger mean Nusselt number and smaller thermal performance criterion, better heat transmission performance is found for thicker horizontal middle section and wider vertical sections. The maximum reduction in thermal performance criterion is found to be 87.8 % for increasing the width of the vertical sections. However, in the cases of Ha and d/L, there is an interesting transition in Nusselt number noticed for different Rayleigh numbers.

Role of partial stable stratification on fluid flow and heat transfer in rotating thermal convection

The liquid iron core of the Earth undergoes vigorous convection driven by thermal and compositional buoyancy. The dynamics of convective fluid motions and heat transfer in such conditions are determined by background rotation, geometrical symmetry, and thermal interactions across the boundaries. In this study, rotating thermal convection in a horizontal fluid layer is considered to understand the fluid flow characteristics in the Earth's outer core focusing on the regions close to the rotational axis. The effects of a partial stable stratification on fluid flow and heat transfer are investigated to ascertain the physical significance of thermal core–mantle interaction on geomagnetic field generation driven by core fluid motion. It is found that even with non-linear evolution, convective instabilities retain the fundamental characteristics of linear onset modes. Mildly supercritical regimes lead to near laminar flows with the transition to turbulent convection occurring for strongly driven convection around 50–100 times enhanced buoyancy. Axial symmetry breaking and preferential damping of small-scale vortical structures are the hallmark of penetrative convection. Rapid rotation sustains small-scale helical flows in stable regions, a necessary ingredient for the sustenance of Earthlike dipolar magnetic fields. Coherent flow structures for strongly turbulent convection are obtained using reduced-order modeling. The overall total heat transfer is suppressed (up to 25%) due to the stable stratification although convective efficiency is enhanced (up to 30%) in the unstable regions favored by rapid rotation. Flow suppression is overcome under strong buoyancy forces, a relevant dynamical regime for deep-seated dynamo action in the Earth's core.

Slip topology of steady flows around a critical point: Taking the linear velocity field as an example

The flow of viscous fluids is considered as the aggregation of the motion of fluid particles when the fluid is conceived to be made up by an infinite number of particles. As an alternative of this conventional model, fluid motion could be understood as the slip of fluid layers with a molecular scale over each other, where the slip structures of fluid and their associated small-scale motion are characterized by an axial-vector-valued differential 1-form, called the vortex field. In this paper, in the case of steady flows we define the swirling degree of the velocity field at a point, and further the swirl field of the steady flow, to study the slip topology of fluid or the local streamline pattern around the critical point. The linear velocity field in the right real Schur form is used to carry out detailed analyses around the isolated critical point. Theoretical deduction and numerical test unveil the connection between the swirling degree and the swirl field, greatly make clear the topological property of slip structures of fluid in steady flows, especially in three-dimensional space.